Tk Series Synchronous Motor for Drive Compressors and Pumps Tk7100-20 2900 7100kv 10kv IP20

I. Overview
The massive 3-period synchronous motor for TK collection air compressor is a large-performance sequence solution specifically designed and created by our firm for the load of air compressor.
This collection of motors adopts new technologies, new materials, new procedures, beautiful materials assortment, and innovative production. It has the characteristics of small size, light bodyweight, gorgeous look, large effectiveness, low sound, low vibration, protected and reliable procedure, and handy use and routine maintenance.

2. Implementation requirements
GB755 Rotating Motor Score and Efficiency
Classification of GB/T997 rotary motor composition variety, installation type and junction box position (IM code)
GB/T1571 Three-stage synchronous motor check strategy
GB/T1993 Rotating Device Cooling Approach
GB/T4942.one Security class (IP) classification of the general construction of rotating electrical machines
GB/T10068 The measurement, evaluation and restrict of mechanical vibration with a shaft heart height of 56mm and earlier mentioned
GB/T10069 Rotating Equipment Sound Measurement Strategy and Restrict
JB/T8667.one CZPT Situations of Huge A few-section Synchronous Motor Component one: TK Collection
3. Fundamental specialized parameters
Power selection: 250~10000KW
Rated voltage: 6000, 10000V
Rated pace: 250, 273, three hundred, 333, 375, 428, 500, 600r/min
Rated frequency: 50HZ
Protection level: IP00, IP20, IP23, IP44
Insulation course: F
Quota: SI
Cooling approach: IC01, IC37, IC81W
Installation approach: IM7311, IM5710, IM7312, IM7315
*Can be produced in accordance to other parameters in accordance to user demands
4, complex traits
4.one The structural layout is sensible, risk-free and reliable, and the ability to stage out of phase is sturdy.
4.2 The main insulation framework utilizing new insulating materials has high voltage resistance and extended motor life.
4.three The temperature increase margin is big. The motor adopts F-course insulation, and the temperature rise is assessed in accordance to the temperature rise limit of the B pole insulation.
4.4 The defense gadget is sophisticated and complete.
4.1.1 The stator windings and bearings are geared up with temperature detection products, which can detect, alarm and excursion.
four.4.two Shutdown room heater with anti-condensation impact.
four.five Large inertia. Motors with distinct times of inertia can be developed according to user requirements.
5, framework variety
5.1 The overall framework of this collection of motors is welded with metal plates for the frame, stop include, and base plate. The motor is an impartial cavity, and the slip ring can be created with various safety levels in accordance to consumer specifications.
five.two Stator: The stator body is welded by metal plate. The motor stator outlet is led out by a high-voltage rubber cable. The outlet placement can be led out from the reduce portion of the foundation or from the major junction box on the facet of the motor.
The stator main is superimposed by reduced-reduction silicon steel sheets, and the core sections are separated by radial ventilation ducts.
The stator winding is F quality insulation, and the temperature rise is assessed in accordance to B grade to help lengthen the services daily life. It adopts VPI overall dipping paint treatment, which has higher electrical functionality, mechanical strength, insulation overall performance, dampness resistance and thermal balance.
5.3 The rotor magnetic pole core is made of laminated steel plates, and has distinct constructions this sort of as magnetic pole screws and T tails. The rotor bracket has air flow holes and is outfitted with a supporter, which can properly handle the temperature rise of the rotor.
5.4 Adopt seat type spherical sliding bearing. The bearings are insulated to avert shaft currents.
Use new lubricating oil and skinny-walled bearing alloy tiles, and established electromagnetic centerline signs.
five.5 According to consumer wants, the slip ring can be designed as a optimistic strain air flow construction to improve the security of the motor. The complete duration of the motor with the positive pressure ventilation structure of the slip ring is a bit increased.
six. Situations of Use
6.1 Voltage fluctuation: ±5% (It can operate below ±10% under the problems of seven.3 in GB755)
6.two Frequency fluctuation: ±2%
6.3 The altitude does not exceed 1000m
6.4 The highest ambient temperature does not exceed +40ºC, and the least is 0ºC.
Seven, design description
 TK1250-16/2150

Outer diameter of stator punch (Φ2150mm)

Quantity of poles (sixteen poles)

Rated energy (1250KW)
3-stage synchronous motor for compressor
8. Buying directions
eight.one Just before positioning an get, make sure you refer to the item catalog of this series to explain the required merchandise design, specs and other data. If there is a discrepancy between the specifications and the samples, please get in touch with our firm.
8.2 The motor product, rated electricity, synchronous velocity, rated voltage, rated frequency, protection level, moment of inertia, rotation path, installation variety, and so forth. must be indicated when purchasing.
8.3 The sample technological data sheet only lists the related info of motors with rated voltages of 6KV and 10KV. If customers require other voltage levels, our firm can also give appropriate technical knowledge when ordering.
8.4 The technological info and proportions in the sample are only for reference when the user selects the model. The official data will be supplied by the company after the agreement or complex arrangement is signed.
eight.5 If there are any other specific specifications, make sure you supply the requirements and indicator the related complex agreement when buying.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk7100-20 2900 7100kv 10kv IP20