Pet Floor Electric Heating Film Roll-to-Roll Printing Machine

Display screen printing & drying device for making electric heating film

 

– printing width 500mm 
– drying circumstances 150C for 15-20 mins 
– roll-to-roll printing 
– corona therapy just before printing
Idea: We can manufacture in accordance to customer’s needs.

 

Movie:
http://v.youku.com/v_display/id_XNjg1OTY0NjMy.html

Application Scope:

This equipment Can print all sorts of special resources: Such as PET, PVC, Laptop, thin film, transfer paper, Trinidad and Tobago, dragon, automatic pasting trademark, non-woven paper and other kinds of bundle material.
 
CZPT parameters:

Merchandise Roll to Roll Silk Screen Printing Machine with IR Dryer.
Printing measurement 500×600 mm
Screens frame dimensions 700×950 mm
Printing bedplate measurement 650×850 mm
Max. printing substance with five hundred mm
Printing velocity 1200-1800 cycle/h
Printing accuracy ±0.571
Equipment dimensions 3000×1200×1650 mm
Printing platform aperture .8 mm(promise the higher precision printing of extremely thin content)
Energy 220V/2.5kw
Printing feeding technique
 
CZPTed higher energy motor, patent vacuum suction roller, promise the higher precision printing of extremely thin content.
Printing positioning system monitor CCD automatic chasing aspect positioning technique, to obtain non-squander higher precision trapping printing.
Machine handle panel CZPT PLC contact monitor guy-device management system.
Toaster Measurement: 2100×2300×1040 mm
Heating duration: 50m
Voltage: 220V/380V
Automated correction method.
Automated laminating system.
Curing approach Maximum 160 ºChot air circulation curing
Feeding device 1200×1200×1000 mm(choose computerized tear movie program as ask for )
Complete fat 1500kg
Attachment tools 1 set

 

Item Laminating Equipment
Heating roller measurement(mm) 1100
Successful laminating dimensions(mm) 1000
Laminating speed(m/min) one-five
Laminating thickness(mm) -5
Heating power(KW) one.2×2
Total power(KW) three.5
Device measurement(mm) 4500×1600×1500
Device fat(KG) 1200

 
 three. Operation treatment
 

  1. Verify the subsequent before turning on the laminating machine.

 
(1)Make positive the machine is in a risk-free state.
(two)Adjust the film conveying to make uniform stress.
(three)Make sure the hole between the adhesive coating roll and adhesive is parallel.
(four)Detecting the temperature of the heat roll to make certain it is the identical temperature displayed on the thermometer.
(5)Make positive the pressure reach 15-twenty, or will impacting product top quality.
(6)Clean up rubber roll to steer clear of debris in the product.
 
3-two Procedure
 
(one)Right after end the planning work, Flip on the major power swap, turn on the heating roll and motor, and then flip on the oil pump, change the movement of laminated adhesive, change the stability among rolls.
(two)Alter the place of the movie feeding table, add laminating adhesive, and then warmth the drying tunnel.
(three)Following testing numerous films, modify the heating temperature, strain and air stream of the drying tunnel, until the very best result.
 

  1. Steps of turning off the device.

 
(one)End heating, following cooling, switch off the motor and admirer.
(2)Thoroughly clean all the rolls for up coming use.
(three)Insert lubrication oil to the injection hole of reducer to keep the device in well-lubricated state.
(four)Finally, switch off the electrical power of laminating equipment, the main electricity.
 
3-4 Maintenance
 
(one)Clean the device, specifically the heating cylinder,  rubber roll, adhesive coating roll and scraping roll. If there are indelible oil stains or graze on the area of the roller, release and polish it.
(two)Include lubrication oil regularly. Pay out unique consideration to the equally ends bearing lubrication of heating roll, and the reducer lubrication, to keep the equipment in well-lubricated state.
(3)Check out the attachment bolt of all parts frequently to maintain a very good connection.
(4)Device grounding need to be protected and reliable, to prevent electric powered shock.
(5)Four inspections every 6 months.
 

Pet Floor Electric Heating Film Roll-to-Roll Printing Machine