DC Brushless Servo Motor for 3D Printer

DC Brushless Servo Motor For 3D printer

57IV90/57IV130/57IV180 Attributes
one.Working voltage: DC input voltage 15VDC to 50VDC ,suggest voltage is 36V
two.The max steady output current is 10A, the max peak existing is 22A (three instances overload capacity) 
three.Appropriate differential or solitary-ended pulse / direction command, have three control mode of place, velocity and torqe
four.Using FOC magnetic place manage technologies and place vector pulse width modulation (SVPWM) closed-loop management technologies
five.The number of pulses for each cycle (subdivision) can be established by the debug application or the dial change placing(electronic gear ratio)
6.Have 3 kinds of 90w,130w and 180w DC brushless servo motor to decide on.
7.Have security of overvoltage, undervoltage, overcurrent and tolerance,etc.
eight.One / double pulse manner, the pulse legitimate edge can be choose.
nine.The max pulse frequency of handle instruction is 500KHz (manufacturing facility default is 200KHz)
ten.Pulse, course and permit signal enter interface degree is four.five to 28V compatible
eleven.With serial RS232 / RS485 debugging operate, but require to use our specific serial debugging cable 
12.Efficiency: easy speed, small overshoot ,tiny tracking error, low heat of motor and driver

Driver Product And Variety Xihu (West Lake) Dis.

Motor Type  57IV90 57IV130 57IV180
Rated power(W) 90W 130W 180W
Vector Maximum Current 16A 18A 22A
Body Length(MM) 106.2 0.five 126.2 0.five 146.2 0.5
Operation Voltage 15-50Vdc,36Vdc recommend 
Overvoltage Protection Voltage 68Vdc±2
Control Method 32 bits DSP vector FOC control technology
Pulse Limit Frequency 500KHz(factory default 200KHz)
Protection Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm
Input Signal  Pulse, direction and enable differential / single-ended interface signal,
interface level 4.five-28Vdc compatible, no need external current limiting resistor
Output Signal  Alarm / in-position signal OC output, the output capacity is100mA, need external
pull-up resistor, the maximum pull up voltage is 24Vdc
Electronic Gear Ratio Default 4000 / rev, through the DIP switch or debug software setting subdivision
(two hundred-51200)
Position Error Control Accuracy ±1 Pulse
Speed Control Accuracy  ±2 rpm
Maximum  Acceleration 100 rpm/ms

Dialing Swap Configurations

Pulse/Rev. SW1 SW2 SW3 SW4
Default ON ON ON ON
800 OFF ON ON ON
1600 ON OFF ON ON
3200 OFF OFF ON ON
6400 ON ON OFF ON
12800 OFF ON OFF ON
25600 ON OFF OFF ON
51200 OFF OFF OFF ON
1000 ON ON ON OFF
2000 OFF ON ON OFF
4000 ON OFF ON OFF
5000 OFF OFF ON OFF
8000 ON ON OFF OFF
ten thousand OFF ON OFF OFF
20000 ON OFF OFF OFF
40000 OFF OFF OFF OFF

Subdivision accuracy (electronic equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the push employs the interior default micro-stage subdivision, the default inner subdivision of the driver is 400Pulse / rev, and the digital equipment ratio can also be established by the debugging software program. SW5 set the motor direction,when turnON, the motor turns clockwise (CW),when change OFF, the motor turns counterclockwise(CCW). SW6 handle mode selection, whenON, the motor enters the self-test method,creating 1 CZPT and reverse revolution, has been recurring right up until exit self-check manner, the exterior manage signal is invalid at self check method, whenOFF, the motor exits self-take a look at mode,then the exterior manage signal is legitimate.

Mechanical Composition Dimension

 Driver mode Motor body length(mm) Driver thickness(mm) Integrated motor driver length(mm)
57IV90 76 30.2 106.2
57IV130  96 30.two 126.two
57IV180  116 thirty.two 149.two

Observe : All above is generally utilized, and we can personalize in accordance to your ask for or select the suitable design for you, please explain to us subsequent parameters: recent, voltage, keeping torque, physique size,the software region.

Software
Ideal for all types of small and medium-sized automation equipments and instruments. Such as: laser tools, healthcare gear, 3D printer, tiny and medium-sized engraving machine, electronic processing equipment, computerized crawling gear, particular CNC equipment tool, packaging equipment and robotic. It is especially helpful for customers who anticipate lower sound and substantial speed applications.

Packaging and transport
1.Outer packing: CZPT export carton with needed shipping and delivery marks
2.Inner packing: Water-proof packing with shock absorbing EPE and cardboard surrounded 
three.As for each the customers specifications

Our provider
1.Functioning time : eight:00 a.m – 10:00 p.m .Any concerns, please notify us freely, we will be reply you asap.
2.Direct time : For samples, two to five days will be Ok. For mass creation, the direct time rely on the portions you need.
three.Warrantity interval : 18 months and Lifestyle-lengthy upkeep service for the merchandise.
four.We acknowledge products customize.

FAQ
Q1: How to select the suited stepper or servo motor?
A1: There are serveral crucial items: measurement, length, holding torque, voltage, present and so forth.Following confirm them and told us, we can pick the suited one particular for you.

Q2: Any other strategies to finalize the model?
A2: Positive, you can ship us the product you are using, we can help you discover the suitable one.

Q3:How to promise the Good quality of CZPT Elements?
A3: We have the integrated method for industrial parts top quality management. We have IQC (incoming quality control), IPQCS (in approach good quality management part), FQC (final quality manage) and OQC (out-going quality manage) to handle every single method of industrial elements prodution.

This fall:What is actually the Edge of Your Areas for Market Items? 
A4:one.The gain of our products is the competitive costs, rapidly shipping and higher high quality. Our
personnel are accountable-oriented, pleasant-oriented,and diligent-oriented. Our goods are featured by strict tolerance, easy end and long support time.
two.Prior to we deliver out the merchandise,we check them more than three times.

Get in touch with

 

DC Brushless Servo Motor for 3D Printer